TIPP OIL

YOUR SPECIALIST FOR QUALITY LUBRICANTS | MADE IN GERMANY

EMISSION REDUCTION THROUGH REVOLUTIONARY REBOTTLE DEPOSIT SYSTEM

Outboard 10W-40 Blue

Outboard 10W-40 is a semi-synthetic outboard four-stroke engine oil based on selected base oils and special additives ensure perfect lubrication and excellent wear protection.

Outboard 10W-40 Blue product data sheet
Outboard 10W-40 Blue safety data sheet

Description

TIPP-OIL Outboard 4-stroke 10W-40 is a part synthetic 4-stroke outboard motor oil based on selected base oils and special additives guarantee optimum lubrication and excellent wear protection. Outboard 4-stroke 10W-40 is particularly suitable for the lubrication of 4-stroke outboard motors, which at high engine speeds and high loads to be operated. Outboard 4-stroke 10W-40 meets the requirements of the National Marine Manufacturers Association, NMMA FC-W.

Instructions for use

TIPP-OIL Outboard 4-stroke 10W-40 is suitable for use in all outboard engines, for the use of FC-W Oil is recommended. The operating instructions of the engine manufacturer must be observed. Outboard 4-stroke 10W-40 is especially recommended for use in outboard motors, Evinrude, Tohatsu/Nissan, Johnson/Evinrude, Yamaha, Honda and Suzuki. Outboard 4-stroke 10W-40 can also be used in engines that are operated in sea water.

Quality classification specification

  • API SM
  • NMMA FC-W, NMMA FC-W (CAT)

Recommendation:

  • Honda
  • Johnson/Evinrude
  • Mercury/Verado
  • Suzuki
  • Tohatsu/Nissan
  • Jamaica

Characteristics

  • Excellent lubrication of all engine parts
  • Combustion without build-up or residue
  • High resistance to wear, oxidation and corrosion protection
  • Adhesion strength, pressure - and temperature-resistant Oil film
  • Strong cleaning effect and clean burning with no deposits or residues
  • Outstanding shear stability

Technical specifications

 Properties  Data  unit  testing under
 Kinematic Viscosity at 40°C   87,7  MM²/S  ISO 51562-2
 Kinematic Viscosity at 100°C   13,5  MM²/S  ISO 51562-2
 viscosity index  156  ISO 2909
 Appearance  BLUE  visually
 Density at 15°C  857,0  KG/M³  DIN 51 757
 pour point  -39  °C  ISO 3016

 

All data given are approximate values and are subject to normal production fluctuations. To the best of our knowledge, all information corresponds to the current state of knowledge and our development. We reserve the right to make changes. All references to DIN standards are only used to describe the goods and do not constitute a guarantee. In the event of problems, request technical advice.

Go to Top