TIPP OIL

YOUR SPECIALIST FOR QUALITY LUBRICANTS | MADE IN GERMANY

EMISSION REDUCTION THROUGH REVOLUTIONARY REBOTTLE DEPOSIT SYSTEM

DXS Premium 0W-20

DXS Premium 0W-20 is a synthetic mid-SAPS motor oil for passenger car petrol and diesel engines with and without turbocharging and direct injection.

DXS Premium 0W-20 Produktdatenblatt
DXS Premium 0W-20 safety data sheet

Category:

Description

TIPP-OIL DXS Premium 0W-20 is a synthetic Mid SAPS smooth-running motor oil for petrol and diesel car engines with and without turbocharging and direct injection. It ensures that premature fuel ignition LSPI (Low Speed Pre Ignition) is avoided, thereby avoiding engine damage. TIPP-OIL DXS 0W-20 is characterized by excellent cold start properties, minimization of fuel consumption, friction and wear. Extended oil change intervals according to manufacturer's instructions.

Application Notes

TIPP-OIL DXS Premium 0W-20 is ideally suited for energy-saving year-round use in modern passenger car petrol and diesel engines. It is recommended for Opel and General Motors passenger car engines according to Dexos 1 specification under all operating conditions. The operating instructions of the vehicle and engine manufacturers must be observed.

Quality Classification Specifications:

  • API SN (RC)
  • API SN Plus
  • ILSAC GF-5

Recommendation:

  • Licensed: API SN (RC)
  • Licensed: ILSAC GF-5
  • Licensed: API SN Plus

DXS Premium 0W-20 is tried and tested in aggregates with filling instructions:

  • Dexos1 OEGen 2
  • Chrysler MS-6395
  • Fiat 9.55535-GSX/CR1
  • GM 6094M
  • Ford WSS-M2C947-A

Characteristics:

  • A very stable and excellent viscosity behavior, shear stability
  • Fuel savings under all operating conditions
  • Very good detergent and dispersing properties
  • Neutrality towards sealing materials
  • Excellent protection against wear, corrosion and foaming
  • catalyst suitability
  • High oxidation stability
  • A secure lubricating film at very high operating temperatures
  • Very good cold start properties

Technical characteristics

 Characteristics  Data  Unit   Examination after:
 kinematic viscosity at 40°C   44,5  MM²/S  ISO 51562-2
 kinematic viscosity at 100°C    8,3  MM²/S  ISO 51562-2
 viscosity index  164  ISO 2909
 appearance   Yellow
 visual density at 15°C  846  KG/M³  EN ISO 12185
 pour point  -39  CELSIUS  ASTM D 7346
 Total base number    8,7  ASTM D 2896

 

All data given are approximate values and are subject to normal production fluctuations. To the best of our knowledge, all information corresponds to the current state of knowledge and our development. We reserve the right to make changes. All references to DIN standards are only used to describe the goods and do not constitute a guarantee. In the event of problems, request technical advice.

Go to Top