TIPP OIL

YOUR SPECIALIST FOR QUALITY LUBRICANTS | MADE IN GERMANY

EMISSION REDUCTION THROUGH REVOLUTIONARY REBOTTLE DEPOSIT SYSTEM

Pro Longlife IV 0W-20

Pro Longlife IV 0W-20 has been specially developed for the latest Volkswagen specification VW 508 00/509 00 (also known as VW Blue Oil).

Pro Longlife IV 0W-20 Produktdatenblatt
Pro Longlife IV 0W-20 safety data sheet

Category:

Description

TIPP-OIL Pro Longlife IV 0W-20 was specially developed for the latest Volkswagen specification VW 508 00/509 00 (also known as VW Blue Oil). It combines durability and protection in a low viscosity motor oil with a reduced HTHS. Developed by experts to support the durability and efficiency of vehicles with latest generation petrol and diesel engines that require SAE 0W-20 viscosity grades. The ACEA A1/B1 specification is met, so TIPP-OIL Pro Longlife IV 0W-20 is of course also suitable for many vehicles from other manufacturers.

Application Notes

TIPP-OIL Pro Longlife IV 0W-20 can only be used in modern engines and is not downward compatible. It is ideally suited for applications with an extended drain interval (long life) when the use of a SAE 0W-20 engine oil with reduced ash content and reduced HTHS is required. Distinguishing features such as a specific color and chemical markers are included. Observe manufacturer's instructions!

Quality Classification Specifications:

  • ACEA A1/B1

TIPP-OIL Pro Longlife IV 0W-20 has been tried and tested in aggregates with filling specifications:

  • VW 50800/50900
  • Porsche C20

Characteristics:

  • future-proof additives for future engine generations
  • high fuel efficiency
  • excellent engine protection
  • Excellent for extended maintenance intervals
  • Lowered HTHS viscosity for maximum fuel savings
  • highest oxidation stability based on fully synthetic PAO base oils
  • Typical VW Blue Oil coloring to avoid mix-ups
  • best cold start properties and thanks to SAE class 0W-20

Technical characteristics

 Characteristics  Data  Unit   Examination after:
 kinematic viscosity at 40°C   39,2  MM²/S  ISO 51562-2
 kinematic viscosity at 100°C    8,0  MM²/S  ISO 51562-2
 viscosity index  182  ISO 2909
 appearance Green
 visual density at 15°C  836  KG/M³  EN ISO 12185
 pour point  -60  CELSIUS  ASTM D 7346

 

All data given are approximate values and are subject to normal production fluctuations. To the best of our knowledge, all information corresponds to the current state of knowledge and our development. We reserve the right to make changes. All references to DIN standards are only used to describe the goods and do not constitute a guarantee. In the event of problems, request technical advice.

Go to Top