TIPP OIL

YOUR SPECIALIST FOR QUALITY LUBRICANTS | MADE IN GERMANY

EMISSION REDUCTION THROUGH REVOLUTIONARY REBOTTLE DEPOSIT SYSTEM

FD Excellence 0W-30

FD Excellence 0W-30 is a synthetic, low-friction, Low-SAPS engine oil for passenger car diesel engines.

FD Excellence 0W-30 Produktdatenblatt
FD Excellence 0W-30 safety data sheet

Category:

Description

TIPP-OIL FD Excellence 0W-30 is a synthetic Low SAPS engine oil for passenger car diesel engines. It's starting properties, minimisation of fuel consumption, friction and wear, is characterized by excellent Cold. TIPP-OIL FD Excellence 0W-30 is an engine oil, specially designed for the requirements of Ford diesel engines with diesel particulate filters. TIPP-OIL FD Excellence 0W-30 achieved by its formulation with special base oils with a high viscosity index

Application Notes

TIPP-OIL FD Excellence 0W-30 ist für den energiesparenden, ganzjährigen Einsatz in modernen PKW Dieselmotoren bestens geeignet. TIPP-OIL FD Excellence 0W-30 wird in Motoren von Ford mit den angegebenen Spezifikationen eingesetzt. Die Betriebsvorschriften der Kfz- und Motorenhersteller sind zu beachten.

Quality Classification Specifications:

  • ACEA C2

Approvals:

  • Jaguar Land Rover STJLR.03.5007

Recommendation:

  • Ford WSS-M2C950-A
  • Fiat 9.55535-GS1/DS1

Characteristics:

  • Excellent cold starting properties, even at low temperatures below -30°C
  • Fuel savings under all operating conditions
  • Neutrality towards sealing properties
  • Low evaporation tendency, therefore low oil consumption
  • Extensive protection against wear, corrosion and foaming
  • Extended oil change intervals protect natural resources
  • Low SAPS = reduced sulphated ash, Phosphorus and sulfur

Technical characteristics

 Characteristics  Data  Unit   Examination after:
 kinematic viscosity at 40°C   46,0  MM²/S  ISO 51562-2
 kinematic viscosity at 100°C   9,8  MM²/S  ISO 51562-2
 viscosity index  206  ISO 2909
 appearance Yellow
 visual density at 15°C  846  KG/M³  EN ISO 12185
 pour point  -45  CELSIUS  ASTM D 7346

 

All data given are approximate values and are subject to normal production fluctuations. To the best of our knowledge, all information corresponds to the current state of knowledge and our development. We reserve the right to make changes. All references to DIN standards are only used to describe the goods and do not constitute a guarantee. In the event of problems, request technical advice.

Go to Top