TIPP OIL

YOUR SPECIALIST FOR QUALITY LUBRICANTS | MADE IN GERMANY

EMISSION REDUCTION THROUGH REVOLUTIONARY REBOTTLE DEPOSIT SYSTEM

FS Excellence FE 5W-20

FS Excellence FE 5W-20 is a synthetic low-viscosity motor oil for passenger car gasoline and diesel engines with and without turbo-charging and direct injection

FS Excellence FE 5W-20 Produktdatenblatt
FS Excellence FE 5W-20 safety data sheet

Category:

Description

TIPP-OIL FS Excellence FE 5W-20 is a synthetic smooth-running engine oil for passenger car gasoline and diesel engines with and without turbo-charging and direct injection. TIPP-OIL FS Excellence FE 5W-features 20 excellent cold starting properties, minimisation of fuel consumption, friction and wear. Because of a considerable fuel saving TIPP-OIL FS Excellence FE 5W-20 through the reduction of emissions to protect the environment contributes.

Application Notes

TIPP-OIL FS Excellence FE 5W-20 is for the energy savings year - round use in modern passenger car gasoline and diesel engines quite well-suited. The operating instructions of the Vehicle and engine manufacturers are to be observed.

Quality Classification Specifications:

  • API SN/CF
  • ILSAC GF-5
  • ACEA A1/B1
  • ACEA C5

TIPP-OIL FS Excellence FE 5W-20 is proven in practice and tested in aggregates with Filling:

  • Ford WSS-M2C948-A/B
  • Jaguar Land Rover STJLR.03.5004
  • Chrysler MS 6395
  • Fiat 9.55535-CR1

Characteristics:

  • Outstanding cold start properties even at low temperatures
  • Fuel savings under all operating conditions
  • Very good detergent and dispersant properties
  • Neutrality towards sealing materials
  • Low evaporation tendency, therefore low oil consumption
  • Extensive protection against wear, corrosion and foaming
  • Extended oil change intervals protect natural resources
  • No oil-related deposits in combustion chambers, in the piston ring zone and on valves

Technical characteristics

 Characteristics  Data  Unit   Examination after:
 kinematic viscosity at 40°C  44,0  MM²/S  ISO 51562-2
 kinematic viscosity at 100°C  8,3  MM²/S  ISO 51562-2
 viscosity index  168  ISO 2909
 appearance Yellowbrown
 visual density at 15°C  843  KG/M³  EN ISO 12185
 pour point  -42  CELSIUS  ASTM D 7346

 

All data given are approximate values and are subject to normal production fluctuations. To the best of our knowledge, all information corresponds to the current state of knowledge and our development. We reserve the right to make changes. All references to DIN standards are only used to describe the goods and do not constitute a guarantee. In the event of problems, request technical advice.

Go to Top