TIPP OIL

YOUR SPECIALIST FOR QUALITY LUBRICANTS | MADE IN GERMANY

EMISSION REDUCTION THROUGH REVOLUTIONARY REBOTTLE DEPOSIT SYSTEM

HC LS UN 5W-40

HC LS UN 5W-40 is a synthetic low-viscosity motor oil for passenger car gasoline and diesel engines with and without turbo-charging and direct injection.

HC LS UN 5W-40 Produktdatenblatt
HC LS UN 5W-40 safety data sheet

Category:

Description

TIPP OIL HC LS UN 5W-40 is a synthetic Mid SAPS engine oil for passenger car gasoline and diesel engines with and without turbo-charging and direct injection. TIPP OIL HC LS UN 5W-40 is a synthetic Mid SAPS engine oil for passenger car gasoline and diesel engines with and without turbo-charging and direct injection. TIPP OIL HC LS UN 5W-40 is characterised by its excellent cold starting properties, minimisation of fuel consumption, friction and wear. The formulation with special base oils TIPP OIL HC LS UN 5W-40 achieves a high viscosity index. The excellent cold start behavior ensures optimum lubrication safety during the cold run phase. Because of a considerable fuel savings and the reduction of emissions TIPP OIL HC LS UN 5W-40 to protect the environment contributes. Extended oil change intervals according to manufacturer's instructions.

Application Notes

TIPP OIL HC LS UN 5W-40 ist ein universelles, synthetisches Leichtlauf-Motorenöl, welches speziell für Pumpe-Düse-Dieselmotoren entwickelt wurde. TIPP OIL HC LS UN 5W-40 ist geeignet für Benzin- und Dieselmotoren in PKW und Transportern mit und ohne Turbolader.

Quality Classification Specifications:

  • API SN/CF
  • ACEA C3

Approvals:

  • Licensed: API SN
  • MB release 229.51
  • VW 505 00/505 01
  • MB-approval 229.31
  • Renault RN0700/0710

TIPP OIL HC LS UN 5W-40 is proven in practice and tested in aggregates with Filling:

  • BMW Longlife-04
  • Ford WSS-M2C917-A
  • MB 226.5
  • Porsche A40
  • Chrysler MS-11106
  • dexos2TM
  • Fiat 9.55535-S2/GH2
  • VW 502 00

Characteristics:

  • Outstanding cold start properties even at low temperatures below -30°C
  • The function of the hydraulic tappets is guaranteed at all temperatures
  • Fuel savings under all operating conditions
  • Reliable lubricating film at high operating temperatures
  • Neutrality towards sealing materials
  • Extensive protection against wear, corrosion and foaming
  • Low evaporation tendency, therefore low oil consumption
  • Extended oil change intervals protect natural resources
  • Mid SAPS = reduced sulfated ash, phosphorus and sulfur

Technical characteristics

 Characteristics  Data  Unit   Examination after:
 kinematic viscosity at 40°C  87,7  MM²/S  ISO 51562-2
 kinematic viscosity at 100°C  14,5  MM²/S  ISO 51562-2
 viscosity index  172  ISO 2909
 appearance Yellow
 visual density at 15°C  849  KG/M³  EN ISO 12185
 pour point  -39  CELSIUS  ASTM D 7346

 

All data given are approximate values and are subject to normal production fluctuations. To the best of our knowledge, all information corresponds to the current state of knowledge and our development. We reserve the right to make changes. All references to DIN standards are only used to describe the goods and do not constitute a guarantee. In the event of problems, request technical advice.

Go to Top