TIPP OIL

YOUR SPECIALIST FOR QUALITY LUBRICANTS | MADE IN GERMANY

EMISSION REDUCTION THROUGH REVOLUTIONARY REBOTTLE DEPOSIT SYSTEM

FS Elite 5W-40

FS Elite 5W-40 is a synthetic low-viscosity motor oil for passenger car gasoline and diesel engines with and without turbo-charging and direct injection.

FS Elite 5W-40 product data sheet
FS Elite 5W-40 safety data sheet

Category:

Description

TIPP-OIL FS Elite 5W-40 is a synthetic smooth-running engine oil for passenger car gasoline and diesel engines with and without turbo-charging and direct injection. TIPP-OIL FS Elite 5W-40 is characterised by its excellent cold starting properties, minimisation of fuel consumption, friction and wear. TIPP-OIL FS Elite 5W-40 offers highest operational safety in all driving conditions, for example in the case of extreme Stop-and-go traffic in the city, as well as high-speed highway driving.

Application Notes

TIPP-OIL FS Elite 5W-40 is for the energy savings year - round use in modern passenger car gasoline and diesel engines quite well-suited. Extended oil change intervals according to manufacturer's instructions. The operating instructions of the Vehicle and engine manufacturers are to be observed.

Quality Classification Specifications:

  • API SN/CF
  • ACEA A3-08/B4-08

Recommendation:

  • BMW Longlife-01
  • MB 229.3/226.5
  • Porsche A40
  • Renault RN0700/0710
  • Volkswagen 502 00/505 00
  • Chrysler MS-10725/12991
  • Fiat 9.55535-H2/M2/N2/Z2
  • Opel GM-LL-B-025
  • PSA B71 2296

Characteristics:

  • Outstanding cold start properties even at low temperatures
  • Fuel savings under all operating conditions
  • Very good detergent and dispersant properties
  • Neutrality towards sealing materials
  • Low evaporation tendency, therefore low oil consumption
  • Extensive protection against wear, corrosion and foaming
  • Extended oil change intervals protect natural resources

Technical characteristics

 Characteristics  Data  Unit   Examination after:
 kinematic viscosity at 40°C  84,1  MM²/S  ISO 51562-2
 kinematic viscosity at 100°C  13,9  MM²/S  ISO 51562-2
 viscosity index  171  ISO 2909
 appearance Yellow
 visual density at 15°C  850  KG/M³  EN ISO 12185
 pour point  -42  CELSIUS  ASTM D 7346

 

All data given are approximate values and are subject to normal production fluctuations. To the best of our knowledge, all information corresponds to the current state of knowledge and our development. We reserve the right to make changes. All references to DIN standards are only used to describe the goods and do not constitute a guarantee. In the event of problems, request technical advice.

Go to Top