TIPP OIL

YOUR SPECIALIST FOR QUALITY LUBRICANTS | MADE IN GERMANY

EMISSION REDUCTION THROUGH REVOLUTIONARY REBOTTLE DEPOSIT SYSTEM

Dura Fusion 5W-40

Dura Fusion 5W-40 is a synthetic low-viscosity motor oil for passenger car gasoline and diesel engines with and without turbo-charging and direct injection.

Dura Fusion 5W-40 Produktdatenblatt
Dura Fusion 5W-40 safety data sheet

Category:

Description

TIPP OIL Dura Fusion 5W-40 is a synthetic Low SAPS engine oil for passenger car gasoline and diesel engines. It is suitable for most modern diesel engines with a particulate filter. TIPP OIL Dura Fusion 5W-40 is characterised by its excellent cold starting properties, minimisation of fuel consumption, friction and wear. It contributes to the conservation of the environment. Extended oil change intervals according to manufacturer's instructions

Application Notes

TIPP OIL Dura Fusion 5W-40 is a synthetic smooth-running engine oil that was specially developed for diesel engines with particle filters.

Quality Classification Specifications:

  • ACEA C4

TIPP-OIL Dura Fusion 5W-40 is proven in practice and tested in aggregates with Filling:

  • MB 229.51/226.51
  • Renault RN0720

Characteristics:

  • Excellent cold starting properties, even at low temperatures below -30°C
  • The function of the hydraulic tappets is guaranteed at all temperatures
  • Fuel savings under all operating conditions
  • Reliable lubricating film at high operating temperatures
  • Neutrality towards sealing materials
  • Extensive protection against wear, corrosion and foaming
  • Low evaporation tendency, therefore low oil consumption
  • Extended oil change intervals protect natural resources
  • Low SAPS = reduced sulphated ash, phosphorus and sulphur

Technical characteristics

 Characteristics  Data  Unit   Examination after:
 kinematic viscosity at 40°C  80,8  MM²/S  ISO 51562-2
 kinematic viscosity at 100°C  13,3  MM²/S  ISO 51562-2
 viscosity index  168  ISO 2909
 appearance Yellowbrown
 visual density at 15°C  848  KG/M³  EN ISO 12185
 pour point  -39  CELSIUS  ASTM D 7346

 

All data given are approximate values and are subject to normal production fluctuations. To the best of our knowledge, all information corresponds to the current state of knowledge and our development. We reserve the right to make changes. All references to DIN standards are only used to describe the goods and do not constitute a guarantee. In the event of problems, request technical advice.

Go to Top