TIPP OIL

YOUR SPECIALIST FOR QUALITY LUBRICANTS | MADE IN GERMANY

EMISSION REDUCTION THROUGH REVOLUTIONARY REBOTTLE DEPOSIT SYSTEM

Mineral 10W-30

Mineral 10W-30 is a synthetic, fuel-saving, SAPS-low engine oil for passenger car gasoline and diesel engines.

Mineral 10W-30 Produktdatenblatt
Mineral 10W-30 safety data sheet

Category:

Description

TIPP OIL Mineral 10W-30 ist ein mineralisches Mehrbereichsmotorenöl für PKW Otto- und Dieselmotoren mit und ohne Turboaufladung sowie für Nutzfahrzeugmotoren. Es ermöglicht verlängerte Ölwechselintervalle gemäß Herstellervorschrift. Darüber hinaus zeichnet sich das TIPP OIL Mineral 10W-30 durch gute Kaltstarteigenschaften und der Minimierung von Kraftstoffverbrauch, Reibung und Verschleiß aus. Mit TIPP OIL Mineral 10W-30 wurde ein zuverlässiges und hochbelastbares Motorenöl entwickelt.

Application Notes

TIPP-OIL Mineral 10W-30 is suitable for year-round use in passenger car gasoline and diesel engines, and commercial vehicle engines. It is used in engines with the specifications indicated. The operating instructions of the Vehicle and engine manufacturers must be observed.

Quality Classification Specifications:

  • ACEA A2/B2
  • API SF/CD
  • CCMC G4/D4/PD2
  • MIL-L-2104D
  • MIL-L-46152B

TIPP-OIL Mineral 10W-30 is proven in practice and tested in aggregates with Filling:

  • MB 227.1

Characteristics:

  • Good cold start properties – even at low temperatures
  • Stable and excellent viscosity behavior
  • Good detergent and dispersing properties
  • Neutrality towards sealing materials
  • Extensive protection against wear, corrosion and foaming
  • catalyst suitability
  • Very good shear stability
  • The prevention of black sludge formation, high oxidation stability

Technical characteristics

 Characteristics  Data  Unit   Examination after:
 kinematic viscosity at 40°C  76,6  MM²/S  ISO 51562-2
 kinematic viscosity at 100°C  11,8  MM²/S  ISO 51562-2
 viscosity index  141  ISO 2909
 appearance Yellowbrown
 visual density at 15°C  872  KG/M³  EN ISO 12185
 pour point  -39  CELSIUS  ASTM D 7346

 

All data given are approximate values and are subject to normal production fluctuations. To the best of our knowledge, all information corresponds to the current state of knowledge and our development. We reserve the right to make changes. All references to DIN standards are only used to describe the goods and do not constitute a guarantee. In the event of problems, request technical advice.

Go to Top