TIPP OIL

YOUR SPECIALIST FOR QUALITY LUBRICANTS | MADE IN GERMANY

EMISSION REDUCTION THROUGH REVOLUTIONARY REBOTTLE DEPOSIT SYSTEM

Classic 40 SAE 40 SA

Classic SAE 40 API SA ist ein unlegiertes Ganzjahresmotorenöl, dessen Zusammensetzung speziell auf die Anforderungen von Oldtimern ohne Ölfilter abgestimmt wurde.

Classic 40 SA SAE 40 Produktdatenblatt
Classic 40 SA SAE 40 safety data sheet

Category:

Description

TIPP OIL Classic SAE 40 API SA is a non-alloy engine oil for year-round use. In its composition, it has been specially adapted to the requirements of the vintage vehicles without Oil filter. In addition, it can be used for petrol and diesel engines are used, which have been developed for single-grade oils for your time. By the carefully selected base oils Classic SAE 40 API SA is a particularly oxidation-resistant, non-foaming and low ash content for less wear and deposits.

Application Notes

TIPP OIL Classic SAE 40 API SA is particularly recommended for use in engines from the pre-war period, in which no Oil is available and sludge in the oil Pan to settle. Furthermore, Classic SAE 40 API SA is also suitable for transmission of vintage and historic vehicles.

Quality Classification Specifications:

  • API SA

Characteristics:

  • Excellent Material Compatibility
  • High oxidation resistance due to selected base oils
  • Neutrality towards sealing materials
  • High content of zinc for safe wear and tear protection
  • Prevention of Varnish and carbon from the cylinders, pistons and valves
  • Reliable lubricating film at high operating temperatures
  • Excellent protection against wear, corrosion and foaming

Technical characteristics

 Characteristics  Data  Unit   Examination after:
 kinematic viscosity at 40°C  139,7  MM²/S  ISO 51562-2
 kinematic viscosity at 100°C  13,9  MM²/S  ISO 51562-2
 viscosity index   95  ISO 2909
 appearance  Yellow
 visual density at 15°C  885  KG/M³  EN ISO 12185
 pour point  -12  CELSIUS  ASTM D 7346

 

All data given are approximate values and are subject to normal production fluctuations. To the best of our knowledge, all information corresponds to the current state of knowledge and our development. We reserve the right to make changes. All references to DIN standards are only used to describe the goods and do not constitute a guarantee. In the event of problems, request technical advice.

Go to Top