TIPP OIL

YOUR SPECIALIST FOR QUALITY LUBRICANTS | MADE IN GERMANY

EMISSION REDUCTION THROUGH REVOLUTIONARY REBOTTLE DEPOSIT SYSTEM

Uni Performance 5W-30

Uni Performance 5W-30 is based on excellent base and additive oils and is a synthetic truck engine oil.

Uni Performance 5W-30 product data sheet
Uni Performance 5W-30 safety data sheet

Category:

Description

TIPP OIL Uni Performance 5W-30 is based on outstanding base oils and additives and is a synthetic fuel-saving "Low SAPS" lorry engine oil. This engine oil is especially suitable for diesel engines under the most severe operating conditions and weather conditions. It is also suitable for use in EURO IV, EURO V and EURO VI engines in combination with low-sulphur diesel fuel, for use in engines with or without particulate filters and exhaust gas catalytic converters. Uni Performance 5W-30 prevents high cold start wear, as it ensures the fastest possible supply to all lubrication points due to its cold viscosity at very low temperatures. It also has a high-temperature viscosity, which reduces friction losses and wear.

Application Notes

TIPP OIL Uni Performance 5W-30 is a low SAPS high-performance commercial vehicle engine oil for EURO IV, EURO V and EURO VI engines that can be used all year round. Uni Performance 5W-30 is suitable for oil change intervals of more than 100,000 km according to manufacturer specifications.

Quality Classification Specifications:

  • API CK-4/SN
  • JASO DH-2
  • ACEA E6/E7/E9

Recommendation:

  • Caterpillar ECF-3
  • Cummins CES 20081/20086
  • DAF Extended Drain
  • DDC 93K222, DDC 93K218
  • Deutz DQC IV-10 LA, Deutz DQC IV-18 LA
  • iveco
  • Mack EO-N Plus, Mack EO-O Premium Plus
  • Mack EOS 4.5
  • MAN M3277, MAN M3271-1
  • MAN M3477, MAN M3677
  • 226.9 MB, 228.31 MB, 228.51 MB
  • MTU type 3.1
  • Renault VI RLD-4/RGD
  • Scania LDF-4
  • Voith Retarder B
  • VOLVO VDS-4.5/VDS-4

Characteristics:

  • Safe cold start behavior
  • Very good oxidation resistance
  • Detergent properties and dispersing power
  • Stable at high temperatures and highly viscous
  • High wear protection
  • Low fuel consumption
  • Low sulfated ash, phosphorus & sulfur

Technical characteristics

 Characteristics  Data  Unit   Examination after:
 kinematic viscosity at 40°C  71,8  MM²/S  ISO 51562-2
 kinematic viscosity at 100°C  12,3  MM²/S  ISO 51562-2
 viscosity index  170  ISO 2909
 appearance  Yellowbrown
 visual density at 15°C  851  KG/M³  EN ISO 12185
 pour point  -42  CELSIUS  ASTM D 7346

 

All data given are approximate values and are subject to normal production fluctuations. To the best of our knowledge, all information corresponds to the current state of knowledge and our development. We reserve the right to make changes. All references to DIN standards are only used to describe the goods and do not constitute a guarantee. In the event of problems, request technical advice.

Go to Top