TIPP OIL

YOUR SPECIALIST FOR QUALITY LUBRICANTS | MADE IN GERMANY

EMISSION REDUCTION THROUGH REVOLUTIONARY REBOTTLE DEPOSIT SYSTEM

Premium UHPD 5W-30

Premium UHPD 5W-30 is a low-viscosity engine oil for all diesel engines with and without turbocharging in trucks, buses and work machines.

Premium UHPD 5W-30 Produktdatenblatt
Premium UHPD 5W-30 safety data sheet

Category:

Description

TIPP OIL Premium UHPD 5W-30 is a smooth-running engine oil for all diesel engines with and without turbocharging in trucks, buses and work machines. It has excellent flow properties even at low temperatures. Reaching critical lubrication points quickly ensures a significant reduction in wear during the warm-up phase. Selected active ingredients ensure maximum engine cleanliness even in short-distance traffic. Premium UHPD 5W-30 enables extended oil change intervals in accordance with manufacturer specifications and high wear protection with low oil and fuel consumption.

Application Notes

TIPP OIL Premium UHPD 5W-30 is ideally suited for use in mixed fleets. It is used in engines with the specified specifications. The operating instructions of the vehicle and engine manufacturers must be observed.

Quality Classification Specifications:

  • API CI-4
  • JASO DH-1
  • ACEA E4/E7
  • Global DHD-1

Recommendation:

  • Caterpillar ECF-2
  • Cummins CES 20076/20078
  • Deutz DQC IV-10
  • Mack EO-N, Mack EO-M Plus
  • MAN M3377, MAN M3277
  • MB 228.5
  • MTU Type 3
  • Renault VI RXD/RLD-2
  • Scania LDF
  • VOLVO VDS-3

Characteristics:

  • Fastest possible oiling after the start
  • Reduction of exhaust particles
  • Environmental friendliness thanks to long oil change intervals
  • Fuel consumption reduction through smooth-running characteristics
  • Protection against mirror surface formation on cylinder tracks
  • Protection against corrosion, sludge and sticking

Technical characteristics

 Characteristics  Data  Unit   Examination after:
 kinematic viscosity at 40°C  71,1  MM²/S  ISO 51562-2
 kinematic viscosity at 100°C  12,1  MM²/S  ISO 51562-2
 viscosity index  168  ISO 2909
 appearance  Yellowbrown
 visual density at 15°C  854  KG/M³  EN ISO 12185
 pour point  -45  CELSIUS  ASTM D 7346

 

All data given are approximate values and are subject to normal production fluctuations. To the best of our knowledge, all information corresponds to the current state of knowledge and our development. We reserve the right to make changes. All references to DIN standards are only used to describe the goods and do not constitute a guarantee. In the event of problems, request technical advice.

Go to Top