TIPP OIL

YOUR SPECIALIST FOR QUALITY LUBRICANTS | MADE IN GERMANY

EMISSION REDUCTION THROUGH REVOLUTIONARY REBOTTLE DEPOSIT SYSTEM

FS Heavy Duty 5W-40

FS Heavy Duty 5W-40 is a high-alloy engine oil with synthetic base oils and selected additives.

FS Heavy Duty 5W-40 Produktdatenblatt
FS Heavy Duty 5W-40 safety data sheet

Category:

Description

TIPP OIL FS Heavy Duty 5W-40 is a high-alloy engine oil with synthetic base oils and selected additives. This motor oil is ideal for commercial vehicles. It guarantees a safe cold start, especially with regard to the low-temperature viscosity at extremely low temperatures. Anti-wear properties and reduction in friction losses. Extended oil change intervals according to manufacturer's instructions.

Application Notes

TIPP OIL FS Heavy Duty 5W-40 is used in truck diesel engines with and without turbocharging. The operating instructions of the vehicle and engine manufacturers must be observed.

Quality Classification Specifications:

  • API CJ-4
  • API SM
  • ACEA E7/E9

Recommendation:

  • Caterpillar ECF-2/ECF-3
  • Chrysler MS-10902
  • Cummins CES 20081
  • DDC 93K218, DDC 93K215, DDC 93K214
  • Deutz DQC II-10 LA
  • Mack EO-O Premium Plus
  • Ford WSS-M2C 171-F1
  • MAN M3575, MAN M3275
  • MB 228.31
  • MTU type 1, MTU type 2
  • Renault VI RLD-3
  • VOLVO VDS-4

Characteristics:

  • Very good wear protection
  • Reduced evaporation tendency
  • Good cold start properties
  • Reduced fuel consumption
  • Excellent temperature and viscosity behavior
  • Best suitability for difficult operating conditions
  • Convincing detergent and dispersing properties
  • High oxidation stability

Technical characteristics

 Characteristics  Data  Unit   Examination after:
 kinematic viscosity at 40°C  90,3  MM²/S  ISO 51562-2
 kinematic viscosity at 100°C  14,5  MM²/S  ISO 51562-2
 viscosity index  166  ISO 2909
 appearance  Yellowbrown
 visual density at 15°C  852  KG/M³  EN ISO 12185
 pour point  -45  CELSIUS  ASTM D 7346

 

All data given are approximate values and are subject to normal production fluctuations. To the best of our knowledge, all information corresponds to the current state of knowledge and our development. We reserve the right to make changes. All references to DIN standards are only used to describe the goods and do not constitute a guarantee. In the event of problems, request technical advice.

Go to Top