TIPP OIL

YOUR SPECIALIST FOR QUALITY LUBRICANTS | MADE IN GERMANY

EMISSION REDUCTION THROUGH REVOLUTIONARY REBOTTLE DEPOSIT SYSTEM

Dexron III H Colorless

Dexron III H Colorless is designed on the Basis of Hydrocrackölen and PAO with special additives and inhibitors.

Dexron III H Colorless Produktdatenblatt
Dexron III H Colorless Sicherheitsdatenblatt

Description

TIPP-OIL Dexron III H Colorless is constructed on the Basis of Hydrocrackölen and PAO with special additives and Inhibition. Dexron III H Colorless has been specially developed for the specified specifications and applications. It provides maximum lubrication and wear protection. Dexron III H Colorless is a universal ATF (Automatic Transmission Fluid) of the latest Generation for all of the automatic transmissions with and without regulated torque Converter lockup clutch.

Instructions for use

TIPP-OIL Dexron III H Colorless is particularly suitable for use in Gearboxes with ATF Dexron III H specification, and with the ATFs of all brands. It is recommended to rinse first with Dexron III H Colorless, before the final filling with Dexron III H is Colorless carried out. The operating instructions of the automobile and engine manufacturers are to be observed.

Quality classification specification

  • GM Dexron® III H

Recommendation

  • Allison C-4, Allison TES-389
  • BMW 83 22 9 407 807, BMW 83 22 9 407 858
  • Caterpillar TO-2
  • Ford MERCON®
  • Ford WSS-M2C 138-CJ, Ford ESP-M2C 166-H
  • MB 236.1, MB 236.2, MB 236.6
  • MB 236.7, MB 236.9, MB 236.10
  • MAN 339 Typ L1/V1/V2/Z1/Z2
  • VOITH H 55.6336.3 x Prolonged expiration (G1363), 55.6335
  • VOLVO 1161521, VOLVO 1161511
  • VOLVO Oil 97340 VOLVO 97341
  • VW G 052 162 (TL 521 62)
  • ZF TE-ML 02F/03D/04D/09A/09B/11B/14A/17C

Characteristics

  • Reliable protection against wear, corrosion and foam formation
  • High and very stable viscosity index
  • Easily at very low temperatures
  • Very low pour point
  • Very good oxidation stability
  • Well-matched friction properties
  • Neutral towards sealing means
  • Neutral behaviour towards non-ferrous metals due to inhibition

Technical specifications

 Properties  Data  unit  testing under
 Kinematic Viscosity at 100°C    7,1  MM²/S  ISO 51562-2
 viscosity index  177  ISO 2909
 Appearance  YELLOW  visually
 Density at 15°C  850,0  KG/M³  DIN 51 757
 pour point  -51  °C  ISO 3016

 

All data given are approximate values and are subject to normal production fluctuations. To the best of our knowledge, all information corresponds to the current state of knowledge and our development. We reserve the right to make changes. All references to DIN standards are only used to describe the goods and do not constitute a guarantee. In the event of problems, request technical advice.

Go to Top