TIPP OIL

YOUR SPECIALIST FOR QUALITY LUBRICANTS | MADE IN GERMANY

EMISSION REDUCTION THROUGH REVOLUTIONARY REBOTTLE DEPOSIT SYSTEM

HLPD 68

HLPD 68 is a detergent hydraulic oil and, therefore, has a high wetting and cleaning properties.

HLPD 68 product data sheet
HLPD 68 safety data sheet

Category:

Description

TIPP-OIL HLPD 68 is a detergent hydraulic oil and has a large network and cleaning effect. It is designed on the Basis of selected base oils with additives to prevent corrosion, wear and friction. HLPD 68 also contains dispersants and detergierenen active ingredients that provide a clean hydraulic system. These additives loosen impurities, keep them in balance and thus allow for the cleaning of soiled hydraulic systems. The functional elements of a hydraulic system will remain free of deposits and bonds. Penetrating amounts of water are emulsified and trouble-free operation of the hydraulic system is guaranteed.

Instructions for use

TIPP-OIL HLPD 68 is used in hydraulics, agriculture, construction machinery, cement factories, foundries, electric multi-disc clutches, as Funktionsprüföl, as Einlauföl for aggregates and machinery, textile machinery and machine tools. HLPD 68 exceeds the requirements of HLP hydraulic oils according to DIN 51 524 part 2 for hydraulics.

specifications

  • DIN 51524-2

Recommendation

  • Daimler Chrysler DBL 6721
  • MAN N 698

Characteristics

  • High resistance to aging
  • Good air release properties
  • Neutrality towards sealing materials
  • Ash and zinc free
  • Extensive protection against wear, corrosion and foaming
  • Very stable and excellent viscosity and temperature behavior
  • Extremely good detergent and dispersing properties
  • Excellent corrosion protection even when absorbing moisture

Technical specifications

 Properties  Data  unit  testing under
 Kinematic Viscosity at 40°C    68,0  MM²/S  ISO 51562-2
 Kinematic Viscosity at 100°C      9,1  MM²/S  ISO 51562-2
 viscosity index  107  ISO 2909
 Appearance  YELLOW  visually
 Density at 15°C  872,0  KG/M³  DIN 51 757
 pour point  -27  °C  ISO 3016

 

All indicated data are approximate values and are subject to the Usual production fluctuations. All information correspond to the best of our Knowledge the current state of findings and our development. Ã"changes remain reserved. All references made to DIN-norms are only for the description of the goods and no warranty is intended. In this Problemfà cases, request technical advice.

Go to Top