TIPP OIL

YOUR SPECIALIST FOR QUALITY LUBRICANTS | MADE IN GERMANY

EMISSION REDUCTION THROUGH REVOLUTIONARY REBOTTLE DEPOSIT SYSTEM

HVLPD 68

HVLPD 68 is a detergent hydraulic oil with high viscosity index for use in a wide temperature range (multi-range hydraulic oil).

HVLPD 68 product data sheet
HVLPD 68 safety data sheet

Category:

Description

TIPP-OIL HVLPD 68 is a detergent hydraulic oil with high viscosity index for use in a wide temperature range (multi-grade hydraulic oil). HVLPD 68 characterized by good viscosity-temperature behaviour, high ageing stability and reliable corrosion protection. HVLPD 68 also contains dispersant and detergent active ingredients that provide a clean hydraulic system. These additives loosen impurities, keep them in balance and thus allow for the cleaning of soiled hydraulic systems. Penetrating amounts of water are emulsified and trouble-free operation of the hydraulic system is guaranteed.

Instructions for use

TIPP-OIL HVLPD 68 is mainly used in hydraulic systems, which are heavily exposed to operating temperatures, abrasion, dirt and water fluctuations. HVLPD 68 is suitable forest for heavy duty mobile (agricultural, and construction equipment) and stationary (industrial equipment, etc.) hydraulic systems.

specifications

  • AFNOR NF E 48-603 HV
  • CETOP RP 91H HV
  • DIN 51524-3
  • ISO 6743-4 HV

Recommendation

  • Denison HF-0/HF-1/HF-2
  • Eaton/Sperry Vickers 1-286-S
  • Eaton/Sperry Vickers M-2950-S
  • GM LH-04-1, GM LH-06-1, GM LH-15-1
  • US Steel 136

Characteristics

  • Excellent wear protection
  • Good Oxidation Stability
  • Very low pour point
  • Neutral towards seals made of plastic
  • Reliable protection against corrosion, even in case of moisture absorption
  • Extremely good detergent and dispersing properties
  • Good air and water separation, thereby preventing the formation of foam

Technical specifications

 Properties  Data  unit  testing under
 Kinematic Viscosity at 40°C    68,8  MM²/S  ISO 51562-2
 Kinematic Viscosity at 100°C    11,6  MM²/S  ISO 51562-2
 viscosity index  163  ISO 2909
 Appearance  YELLOW BROWN  visually
 Density at 15°C  869,0  KG/M³  DIN 51 757
 pour point  -42  °C  ISO 3016

 

All indicated data are approximate values and are subject to the Usual production fluctuations. All information correspond to the best of our Knowledge the current state of findings and our development. Ã"changes remain reserved. All references made to DIN-norms are only for the description of the goods and no warranty is intended. In this Problemfà cases, request technical advice.

Go to Top