TIPP OIL

YOUR SPECIALIST FOR QUALITY LUBRICANTS | MADE IN GERMANY

EMISSION REDUCTION THROUGH REVOLUTIONARY REBOTTLE DEPOSIT SYSTEM

SSF Polar Power Steering Fluid

SSF Polar Power Steering Fluid is a synthetic oil. The properties of SSF Polar Power Steering Fluid are determined by its special formulation is crucial.

SSF Polar Power Steering Fluid product data sheet
SSF Polar Power Steering Fluid safety data sheet

Category:

Description

TIPP-OIL SSF Polar power steering fluid is a synthetic special oil. The properties of SSF Polar Power Steering Fluid are decisively determined by its special formulation. SSF Polar was developed for use as a hydraulic fluid in power steering under extremely low temperature conditions.

Instructions for use

TIPP-OIL SSF Polar power steering fluid has an optimal performance as a central hydraulic oil. SSF Polar Power Steering Fluid is designed for use from -60°C to +100°C and is therefore also recommended for the latest developments on the vehicle market. Particularly suitable for use in cold countries.

specifications

  • DIN 51524-2
  • ISO 11158 HM

Recommendation

  • CETOP RP 91 H
  • Eaton Vickers I-286-S Industrial
  • Eaton Vickers M-2950-S Mobile

Characteristics

  • Good balanced coefficient of Friction
  • High, stable viscosity index
  • Very good oxidation stability
  • No Foam Formation
  • Extremely low pour point
  • Extensive protection against wear, corrosion and foam formation
  • Neutral behaviour towards sealing materials
  • Neutral behavior by Inhibition compared with Non-ferrous metals
  • Good lubricating ability even at low temperatures in Winter

Technical specifications

 Properties  Data  unit  testing under
 Kinematic Viscosity at 40°C    25,4  MM²/S  ISO 51562-2
 Kinematic Viscosity at 100°C     7,6  MM²/S  ISO 51562-2
 viscosity index  295  ISO 2909
 Appearance  GREEN  visually
 Density at 15°C  831,0  KG/M³  DIN 51 757
 pour point  -66  °C  ISO 3016

 

All indicated data are approximate values and are subject to the Usual production fluctuations. All information correspond to the best of our Knowledge the current state of findings and our development. Ã"changes remain reserved. All references made to DIN-norms are only for the description of the goods and no warranty is intended. In this Problemfà cases, request technical advice.

Go to Top