TIPP OIL

YOUR SPECIALIST FOR QUALITY LUBRICANTS | MADE IN GERMANY

EMISSION REDUCTION THROUGH REVOLUTIONARY REBOTTLE DEPOSIT SYSTEM

Dexron III G Red

Dexron III G is designed on the Basis of Hydrocrackölen and PAO with special additives and inhibition.

Dexron III G (rot) Produktdatenblatt
Dexron III G (red) safety data sheet

Description

TIPP-OIL Dexron III G RED is designed on the Basis of hydrocrack Oils and PAO with special additives and Inhibition. Dexron III G RED has been specially developed for the specified specifications and applications. It meets Maximum lubrication and wear protection by special additives. Dexron III G RED is a Universal ATF (Automatic-Transmission-Fluid) of the latest Generation for all of the automatic transmissions with and without controlled torque Converter lockup clutch (so-called. GKÜB = transmission-clutch lock-up), for the transmission of fluids from the type Dexron III G are required.

Instructions for use

TIPP-OIL Dexron III G the RED is especially suitable for use in Gearboxes with ATF Dexron III G rule. It is recommended to flush in advance with Dexron III G RED before beforehand the final filling is made. The operating instructions of the Vehicle and engine manufacturers are to be observed.

Quality classification specification

  • GM Dexron® III G

Recommendation

  • Ford MERCON®
  • Ford WSA-M2C195-A
  • MAN 339 type V1/Z1
  • MB 236.1, MB 236.5
  • VOITH H55.6335.XX (G607)
  • ZF TE-ML 14A/11B/17C/03D/04D/09/02F

Characteristics

  • Reliable protection against wear, corrosion and foam formation
  • High and very stable viscosity index
  • Easily at very low temperatures
  • Very low pour point
  • Very good oxidation stability
  • Well-matched friction properties
  • Neutral towards sealing means
  • Neutral behaviour towards non-ferrous metals by Inhibition

Technical specifications

 Properties  Data  unit  testing under
 Kinematic Viscosity at 40°C   35,0  MM²/S  ISO 51562-2
 Kinematic Viscosity at 100°C    7,2  MM²/S  ISO 51562-2
 viscosity index  176  ISO 2909
 Appearance  RED  visually
 Density at 15°C  848,0  KG/M³  DIN 51 757
 pour point  -54  °C  ISO 3016

 

All data given are approximate values and are subject to normal production fluctuations. To the best of our knowledge, all information corresponds to the current state of knowledge and our development. We reserve the right to make changes. All references to DIN standards are only used to describe the goods and do not constitute a guarantee. In the event of problems, request technical advice.

Go to Top