TIPP OIL

YOUR SPECIALIST FOR QUALITY LUBRICANTS | MADE IN GERMANY

EMISSION REDUCTION THROUGH REVOLUTIONARY REBOTTLE DEPOSIT SYSTEM

Excellence FDL 5W-30

Excellence FDL 5W-30 is a synthetic Mid SAPS low-viscosity motor oil for passenger car petrol and diesel engines with and without turbocharging and direct injection.

Excellence FDL 5W-30 product data sheet
Excellence FDL 5W-30 safety data sheet

Category:

Description

TIPP OIL Excellence FDL 5W-30 is a synthetic Mid SAPS smooth-running motor oil for petrol and diesel car engines with and without turbocharging and direct injection. TIPP OIL Excellence FDL 5W-30 is characterized by excellent cold start properties, minimization of fuel consumption, friction and wear. Due to the formulation with special base oils, TIPP OIL Excellence FDL 5W-30 achieves a high viscosity index. The excellent cold start behavior ensures optimal lubrication reliability in the cold running phase. By significantly saving fuel and reducing the CO2emissions, TIPP OIL Excellence FDL 5W-30 contributes to protecting the environment as well as extended oil change intervals according to
manufacturer specification.

Application Notes

TIPP OIL Excellence FDL 5W-30 is a universal, synthetic, smooth-running engine oil that was specially developed for use in engines with the specified OEM requirements.

Quality Classification Specifications:

  • ILSAC GF-5
  • API SN
  • ACEA C2

TIPP-OIL Excellence FDL 5W-30 has been tried and tested in aggregates with filling specifications:

  • Iveco 18-1811 Classe SC1
  • Fiat 9.55535-S1

Characteristics:

  • Outstanding cold start properties even at low temperatures below -30°C
  • The function of the hydraulic tappets is guaranteed at all temperatures
  • Fuel savings under all operating conditions
  • Reliable lubricating film at high operating temperatures
  • Neutrality towards sealing materials
  • Low evaporation tendency, therefore low oil consumption
  • Extended oil change intervals protect natural resources
  • Extensive protection against wear, corrosion and foaming
  • Mid SAPS = reduced sulfated ash, phosphorus and sulfur

Technical characteristics

 Characteristics  Data  Unit   Examination after:
 kinematic viscosity at 40°C  60,3  MM²/S  ISO 51562-2
 kinematic viscosity at 100°C  10,38  MM²/S  ISO 51562-2
 viscosity index  166  ISO 2909
 appearance Yellow
 visual density at 15°C  849  KG/M³  EN ISO 12185
 pour point  -42  CELSIUS  ASTM D 7346

 

All data given are approximate values and are subject to normal production fluctuations. To the best of our knowledge, all information corresponds to the current state of knowledge and our development. We reserve the right to make changes. All references to DIN standards are only used to describe the goods and do not constitute a guarantee. In the event of problems, request technical advice.

Go to Top