TIPP OIL

YOUR SPECIALIST FOR QUALITY LUBRICANTS | MADE IN GERMANY

EMISSION REDUCTION THROUGH REVOLUTIONARY REBOTTLE DEPOSIT SYSTEM

HC PT Diesel 10W-40

HC PT Diesel 10W-40 is a low viscosity engine oil for all diesel engines with and without turbo charging in trucks, buses and machinery.

HC PT Diesel 10W-40 Produktdatenblatt
HC PT Diesel 10W-40 safety data sheet

Category:

Description

Tipp Oil HC PT Diesel 10W-40 is an engine oil for all diesel engines with and without turbo charging in Trucks, buses and machinery. It is an excellent flow behaviour at low temperatures. The rapid attainment of critical lubrication points ensures a significant reduction of wear and tear during the warm-up phase. Selected active ingredients to ensure the highest level of engine cleanliness, even in the short-haul traffic. HC PT Diesel 10W-40 allows for extended oil change intervals according to manufacturer's instructions and high wear protection with low Oil and fuel consumption.

Instructions for use

TIPP-OIL HC PT Diesel 10W-40 is suitable for use in mixed fleets well. It is used in engines with the specifications indicated. The operating instructions of the Vehicle and engine manufacturers are to be observed.

Quality classification specification

  • ACEA E4/E7
  • API CI-4
  • Global DHD-1
  • JASO DH-1

Approvals:

  • API CI-4
  • Cummins CES 20077/20078
  • Deutz DQC III-10
  • Mack EO-N
  • MAN M 3277
  • MTU Type 3
  • Renault VI RLD-2
  • VOLVO VDS-3

Recommendation:

  • Cummins CES 20076
  • Daewoo Avia
  • DAF HP-1 DAF HP-2
  • DDC 93K215
  • Iveco 18-1804 T3 E4
  • Renault VI RXD
  • Scania LDF-2
  • Tatra TDS 40/16
  • TEDOM 258-4
  • Voith Retarder B
  • Zetor

Characteristics

  • Fuel consumption reduction through smooth-running characteristics
  • Protection against mirror surface formation on cylinder tracks
  • Protection against corrosion, sludge and sticking
  • Fastest possible oiling after the start
  • Reduction of exhaust particles
  • Environmental friendliness through the longest oil change intervals

Technical specifications

 Properties  Data  unit  testing under
 Kinematic Viscosity at 40°C   93,8  MM²/S  ISO 51562-2
 Kinematic Viscosity at 100°C   14,2  MM²/S  ISO 51562-2
 viscosity index  155  ISO 2909
 Appearance  YELLOWBROWN  visually
 Density at 15°C  863,0  KG/M³  DIN 51 757
 pour point  -39  °C  ISO 3016

 

All data given are approximate values and are subject to normal production fluctuations. To the best of our knowledge, all information corresponds to the current state of knowledge and our development. We reserve the right to make changes. All references to DIN standards are only used to describe the goods and do not constitute a guarantee. In the event of problems, request technical advice.

Go to Top