TIPP OIL

YOUR SPECIALIST FOR QUALITY LUBRICANTS | MADE IN GERMANY

EMISSION REDUCTION THROUGH REVOLUTIONARY REBOTTLE DEPOSIT SYSTEM

Hydraulic HVLP 22

Hydraulic HVLP 22 is an ash - and zinc-free multi-range hydraulic oil. The hydraulic HVLP 22 provides effective additives with a high level of wear protection even under extreme loads.

Hydraulic HVLP 22 product data sheet
Hydraulic HVLP 22 safety data sheet

Category:

Description

TIPP-OIL Hydraulic HVLP 22 is on the basis of specially selected base oils developed multi-grade hydraulic oil. It offers effective additives with a high level of wear protection, even under extreme loads. Hydraulic HVLP 22, is characterized by good viscosity-temperature behaviour and reliable corrosion protection.

Instructions for use

TIPP-OIL Hydraulic HVLP 22 is mainly used in hydraulic systems with strongly fluctuating operating temperatures. Hydraulic HVLP 22 is ideally suited for heavy duty hydraulic systems of earthmoving machinery and agricultural machinery. It is favoured in the case of strongly fluctuating operating temperatures, and is allowed to contain in the case of hydraulic systems, the silver or silver - plated construction and operating elements are not used.

specifications

  • AFNOR NF E 48-603 HV
  • CETOP RP 91H HV
  • DIN 51524-3
  • ISO 6743-4 HV

Recommendation

  • Denison HF-0/HF-1/HF-2
  • Eaton/Sperry Vickers 1-286-S
  • Eaton/Sperry Vickers M-2950-S
  • GM LH-04-1, GM LH-06-1, GM LH-15-1
  • US Steel 127 US Steel 136

Characteristics

  • Reliable protection against corrosion
  • Stable Viscosity Index
  • Low pour point
  • Neutral to sealing materials
  • Excellent wear protection
  • Very good oxidation stability
  • Good air and water separation, thereby preventing the formation of foam

Technical specifications

 Properties  Data  unit  testing under
 Kinematic Viscosity at 40°C    22,6  MM²/S  ISO 51562-2
 Kinematic Viscosity at 100°C     5,0  MM²/S  ISO 51562-2
 viscosity index  153  ISO 2909
 Appearance  LIGHT YELLOW  visually
 Density at 15°C  844,0  KG/M³  DIN 51 757
 pour point  -51  °C  ISO 3016

 

All data given are approximate values and are subject to normal production fluctuations. To the best of our knowledge, all information corresponds to the current state of knowledge and our development. We reserve the right to make changes. All references to DIN standards are only used to describe the goods and do not constitute a guarantee. In the event of problems, request technical advice.

Go to Top