TIPP OIL

YOUR SPECIALIST FOR QUALITY LUBRICANTS | MADE IN GERMANY

EMISSION REDUCTION THROUGH REVOLUTIONARY REBOTTLE DEPOSIT SYSTEM

LHC Supreme 0W-30

LHC Supreme 0W-30 is a fully synthetic, low-viscosity engine oil for passenger car gasoline and diesel engines in light vans and high-performance vehicles.

LHC Supreme 0W-30 Produktdatenblatt
LHC Supreme 0W-30 safety data sheet

Category:

Description

TIPP-OIL LHC Supreme 0W-30 is a fully synthetic, smooth-running engine oil for passenger car petrol and diesel engines in light vans and high-performance vehicles with diesel particulate filter DPF and 3-way catalytic converter that require a minimum HTHS of 3.5 mPa*s. TIPP-OIL LHC Supreme 0W-30 is characterized by excellent cold start behavior and, thanks to special additives, extends the service life of the diesel particulate filter DPF and 3-way catalytic converter TCW. TIPP-OIL LHC Supreme 0W-30 achieves a high viscosity index thanks to its formulation with special base oils.

Application Notes

TIPP-OIL LHC Supreme 0W-30 is ideal for energy-saving year-round use in modern car petrol and diesel engines. TIPP-OIL LHC Supreme 0W -30 is suitable for extended oil change intervals and extends the service life of the particle filter. The operating instructions of the vehicle and engine manufacturers must be observed.

Quality Classification Specifications:

  • ACEA C2/C3
  • MB release 229.51

TIPP-OIL LHC Supreme 0W-30 has been tried and tested in aggregates with filling specifications:

  • BMW Longlife-04
  • dexos2 OE
  • MB 229.31
  • Renault RN0700/0710
  • VW 502 00/505 00/505 01

Characteristics:

  • Outstanding cold start properties even at low temperatures below -25°C
  • An extremely stable and excellent viscosity behavior, shear stability
  • Fuel savings under all operating conditions
  • Reliable lubricating film at high operating temperatures
  • Neutrality towards sealing materials
  • Low evaporation tendency, therefore low oil consumption
  • Excellent protection against wear, corrosion and foaming
  • catalyst suitability
  • Extended oil change intervals protect natural resources

Technical characteristics

 Characteristics  Data  Unit   Examination after:
 kinematic viscosity at 40°C   66,0  MM²/S  ISO 51562-2
 kinematic viscosity at 100°C   11,9  MM²/S  ISO 51562-2
 viscosity index  178  ISO 2909
 appearance Yellow
 visual density at 15°C  842  KG/M³  EN ISO 12185
 pour point  -60  CELSIUS  ASTM D 7346

 
All data given are approximate values and are subject to normal production fluctuations. To the best of our knowledge, all information corresponds to the current state of knowledge and our development. We reserve the right to make changes. All references to DIN standards are only used to describe the goods and do not constitute a guarantee. In the event of problems, request technical advice.

Go to Top