TIPP OIL

YOUR SPECIALIST FOR QUALITY LUBRICANTS | MADE IN GERMANY

EMISSION REDUCTION THROUGH REVOLUTIONARY REBOTTLE DEPOSIT SYSTEM

Racing Ultimate 10W-60

Racing Ultimate 10W-60 is a fully synthetic, multigrade engine oil based on specially selected base oils.

Racing Ultimate 10W-60 Produktdatenblatt
Racing Ultimate 10W-60 safety data sheet

Category:

Description

TIPP OIL Racing Ultimate 10W-60 is a fully synthetic, multigrade engine oil based on specially selected base oils. Be high proportion of poly-alpha-olefins (PAO) group V makes it a very special engine oil, which is also the highest demands. Racing Ultimate 10W-60 is suitable due to its special additive for an extremely sporty driving style. Racing Ultimate 10W-60 is suitable for modern gasoline engines under the most severe strain in the race. Racing Ultimate 10W-60 ensures even at very high operating temperatures, optimum lubrication layer.

Application Notes

TIPP OIL Racing Ultimate 10W-60 has been specially developed for Speedway races, and is thus as a special, even under the most severe conditions. Its modern and high-quality basic components in combination with a carefully selected additive package to prevent deposition on thermally highly loaded components.

Quality Classification Specifications:

  • API SN/CF
  • ACEA A3/B4

Characteristics:

  • Very stable and excellent viscosity behavior
  • High shear stability
  • Wear-protecting, high oil film stability
  • Continuous, high oil pressure
  • catalyst suitability
  • Ultra-modern, fully synthetic engine oil for extreme racing conditions
  • Low oil consumption due to low evaporation tendency
  • The highest possible protection against wear, corrosion and foam formation
  • Prevention of black sludge formation
  • Protection of natural resources through extended oil change intervals

Technical characteristics

 Characteristics  Data  Unit   Examination after:
 kinematic viscosity at 40°C  173,5  MM²/S  ISO 51562-2
 kinematic viscosity at 100°C  25,8  MM²/S  ISO 51562-2
 viscosity index  184  ISO 2909
 appearance  Yellow
 visual density at 15°C  852  KG/M³  EN ISO 12185
 pour point  -45  CELSIUS  ASTM D 7346

 

All data given are approximate values and are subject to normal production fluctuations. To the best of our knowledge, all information corresponds to the current state of knowledge and our development. We reserve the right to make changes. All references to DIN standards are only used to describe the goods and do not constitute a guarantee. In the event of problems, request technical advice.

Go to Top