TIPP OIL

YOUR SPECIALIST FOR QUALITY LUBRICANTS | MADE IN GERMANY

EMISSION REDUCTION THROUGH REVOLUTIONARY REBOTTLE DEPOSIT SYSTEM

UTTO

UTTO is based on solvent-refined base oils and is a combined transmission and hydraulic oil. As a specially developed universal oil, it can be used in combined hydraulic and transmission systems in modern tractors.

UTTO Produktdatenblatt
UTTO Sicherheitsdatenblatt

Description

TIPP-OIL UTTO is based on solvent-refined base oils and is a combined gear and hydraulic oil. As a specially developed universal oil, it can be used in combined hydraulic and transmission systems in modern tractors. UTTO guarantees trouble-free operation of all units in all weathers.

Instructions for use

TIPP-OIL UTTO is a universal oil for lubrication and power transmission in combined hydraulic and transmission systems. This is particularly necessary on most agricultural tractors and excavators. It is suitable for wet brakes in powershift clutches and auxiliary drives.

Quality classification specification

  • API GL-4
  • DIN 51524-3 (HVLP-D)

Approval:

  • ZF TE-ML 03E/17E/05F/21F

Recommendation:

  • Allison C-4
  • Case IH-MS 1206/1210
  • Caterpillar TO-2
  • Ford ESN-M2C 86B/C/134D
  • John Deere J20C, J21A
  • Massey Ferguson M1135/M1141/M1143/M1145
  • Scope TE-ML 06K/06R/06S
  • Deutz Allis AC Power Fluid 821 XL
  • FNHA 2-C-200.00/MAT 3506/3525
  • NH410B
  • Renault 180596
  • SDFG OT-1891A
  • Volvo BM WB 101 (BM Valmet, AWB axles)
  • White Farm (AGCO) Q-1802/-182616

Characteristics

  • Very high and stable viscosity index
  • High oxidation stability
  • Very low pour point
  • High pressure absorption capacity
  • Excellent protection against corrosion, wear and foaming
  • Favorable friction behavior in powershift clutches and auxiliary drives

Technical specifications

 Properties  Data  unit  testing under
 Kinematic Viscosity at 40°C   58,0  MM²/S  ISO 51562-2
 Kinematic Viscosity at 100°C     9,7  MM²/S  ISO 51562-2
 viscosity index  153  ISO 2909
 Appearance  YELLOW  visually
 Density at 15°C  862,0  KG/M³  DIN 51 757
 pour point  -39  °C  ISO 3016

 

All data given are approximate values and are subject to normal production fluctuations. To the best of our knowledge, all information corresponds to the current state of knowledge and our development. We reserve the right to make changes. All references to DIN standards are only used to describe the goods and do not constitute a guarantee. In the event of problems, request technical advice.

Go to Top