TIPP OIL

YOUR SPECIALIST FOR QUALITY LUBRICANTS | MADE IN GERMANY

EMISSION REDUCTION THROUGH REVOLUTIONARY REBOTTLE DEPOSIT SYSTEM

ZHF RL Green

ZHF RL green ist ein spezielles Hydrauliköl auf Basis von synthetischem Öl mit hochwertigen Additiven.

ZHF RL Green product data sheet
ZHF RL Green safety data sheet

Category:

Description

TIPP-OIL ZHF RL Green is a special hydraulic oil, based on synthetic base Oils with high-quality additives. Due to its special formulation, the properties of ZHF RL Green are crucial. It provides excellent temperature stability. ZHF RL Green has an optimum performance as a Central hydraulic oil in power steering, rear axle steering, level control, shock absorber, active damping, and
Engine support, for hydrostatic drive for fan, alternator and air conditioning, for stability and traction systems (ABS/ASR/ASC), Central locking, electro-hydraulic convertible top control, hydraulic brake booster and hydro-pneumatic suspension for VW, Audi, Seat and Skoda. Especially for the use in cold countries.

Instructions for use

TIPP-OIL ZHF RL Green is designed for use from -60°C to +130°C and is therefore recommended for the latest developments in the automotive market.

specifications

  • DIN 51524-2

Recommendation

  • CHF202
  • Land Rover Cold Climate PAS Fluid 14315
  • MB 343.0
  • Opel 1940766
  • Peugeot/Citroën 9979.A1
  • Saab 93 160 548
  • VOLVO 30741424
  • VW G 004 000

Characteristics

  • Reliable protection against corrosion
  • Improved viscosity and friction behavior
  • Excellent thermal stability
  • Neutral behaviour towards sealing materials
  • Extremely low pour point
  • Very good wear protection
  • Good Foaming Behaviour

Technical specifications

 Properties  Data  unit  testing under
 Kinematic Viscosity at 40°C    25,3  MM²/S  ISO 51562-2
 Kinematic Viscosity at 100°C     7,1  MM²/S  ISO 51562-2
 viscosity index  267  ISO 2909
 Appearance  GREEN  visually
 Density at 15°C  840,0  KG/M³  DIN 51 757
 pour point  -66  °C  ISO 3016

 

All indicated data are approximate values and are subject to the Usual production fluctuations. All information correspond to the best of our Knowledge the current state of findings and our development. Ã"changes remain reserved. All references made to DIN-norms are only for the description of the goods and no warranty is intended. In this Problemfà cases, request technical advice.

Go to Top