Description
TIPP-OIL CGLP ISO 68 is a mineral CGLP slide way oil. It is distinguished by its special lubrication and sliding properties and its high adhesiveness. Therefore it is particularly suitable for the lubrication of plain and slide ways. It is created with mineral base oils and contains additives and corrosion inhibitors to prevent rust and staining of the plain and slide ways. CGLP ISO 68 is largely resistant to watery metalworking fluids such as drilling, cutting and sanding emulsions and solutions. The lubricant film is not washed off by these fluids.
Instructions for use
TIPP-OIL CGLP O CGLP ISO 68 is suitable for all types of lubrication such as pressure, circulation and central lubrication,also for immersion and pressure lubrication as well as manual lubrication using an oil can. It is also suitable for bearing and gear lubrication.In particular, it is used in machine tools, especially for the lubrication ofhorizontal or vertical slideways and bed tracks as well as linear guideways recommended.
Quality classification Specification
- AFNOR E 60-203 L-G/HG
- DIN 51502 (CGLP)
- DIN 51517-3
- DIN 51524-2
- GB 11118.1-94 L-HG/HM
- MIL-A-A-59113 Type I
- ISO 11158 HG/HM
- ISO 19378 GA/GB
- ISO 6743-13 GA/GB
- ISO 6743-6 CKC
- SAE MS1007 Typ E
- SH/T 0361-98 L-G
CGLP ISO 68 is tried and tested in practice in aggregates requiring adherence to manufacturer's fluid specifications:
- Fives Cincinnati P-53
- GM LW-03-1-04, GM LS-2
- Eaton/Sperry Vickers M-2950-S
Properties
- Very good stick-slip behavior
- High Adhesion
- Excellent corrosion protection, no rust or staining
- Resistant to wattery metalworking fluids
- Good demulsification characteristics
Technical specifications
| Properties | Data | Unit | Testing under |
| Kinematic Viscosity at 40°C | 66,8 | MM²/S | DIN ISO 51562-2 |
| Kinematic Viscosity at 100°C | 8,9 | MM²/S | DIN ISO 51562-2 |
| Viscosity Index | 107 | DIN ISO 2909 | |
| Appearance | YELLOW | visually | |
| Density at 15°C | 870 | KG/M³ | DIN EN ISO 12185 |
| Pour Point | -27 | °C | ASTM D 7346 |
All declared values are approximate and subject to standard production variations. To the best of our knowledge all information reflects the current state of findings and our development. Subject to change.
Any reference to DIN standards are solely for product description purposes and do not represent a guarantee. If problems arise, please consult a technician. 04.08.2021 02:00:07
