Description
TIPP-OIL CLP 150 is produced on a basis of high-quality mineral oils and proven additives. Thanks to its special combination of ingredients, it achieves a stable, highpressure capacity under impact loads. Due to the low pour point of CLP 150, the cold behavior of this product is excellent.
Instructions for use
TIPP-OIL CLP 150 has very good properties as a lubricant. CLP 150 can therefore be used in largely all industrial areas under stress and impact loads.
Quality classification Specification
- AGMA 9005-D94
- DIN 51517-3
Recommendation
- Cincinnati Milacron
- Clean Panel Coker
- US Steel 224
- US Steel S-200
Properties
- An excellent cold behavior
- An excellent wear protection
- Prevents foam formation
- Zinc free, ash free
- A stable, high-pressure capacity under impact loads
- A low pour point
- Inhibits rust and corrosion
Technical specifications
| Properties | Data | Unit | Testing under |
| Kinematic Viscosity at 40°C | 152,3 | MM²/S | DIN ISO 51562-2 |
| Kinematic Viscosity at 100°C | 14,8 | MM²/S | DIN ISO 51562-2 |
| Viscosity Index | 96 | DIN ISO 2909 | |
| Appearance | YELLOW | visually | |
| Density at 15°C | 887,0 | KG/M³ | DIN EN ISO 12185 |
| Pour Point | -27 | °C | ASTM D 7346 |
All declared values are approximate and subject to standard production variations. To the best of our knowledge all information reflects the current state of findings and our development. Subject to change.
Any reference to DIN standards are solely for product description purposes and do not represent a guarantee. If problems arise, please consult a technician. 04.11.2021 01:00:43
